计算机模拟升降法试验的研究

介绍了计算机模拟感度试验的原理，运用计算机模拟方法研究了升降法试验的初始参数选择对感度分布参数估计精度的影响，取得了对升降法有利的试验条件。     

Mathematical Modeling and Parameter Identification of a Planar Servo-Pneumatic Test Facility. Part I: Mathematical Modeling and Computer Simulation

High quality multi-axis test facilities used for testing heavy loads and large structures of industrial equipment are usually simulated, designed and controlled based on reduced model equations neglecting the inertia properties of the actuators. The design and control of servo-pneumatic test facilities used for testing small and light structures must take into account extended test facility models including the various inertia properties of the actuators. In this paper (Part I) an extended test facility model is presented including the various inertia properties and joints of the actuators. These extended model equations are represented in a form well suited to be directly implemented in control algorithms based on exact linearization techniques for real time control. This is done by stepwise projecting the inertia properties of the various actuator housings and actuator pistons down to the common mass of the test table and payload. The resulting extended model equations have the same form as the reduced model equations. They only include more complex system matrices and vector functions. These compact model equations turn out to be suitable for an efficient nonlinear controller design of these test facilities. Computer simulations and associated laboratory experiments show the necessity to use extended model equations in case of testing small and light structures. In Part II of this paper [1] the inertia parameters of the planar test facility will be identified in laboratory experiments.     

铁路车辆/轨道耦合系统在竖向冲击载荷作用下动态响应的计算机模拟研究

车辆与轨道的动态相互作用,是铁路轮轨接触式运输系统中最基本的问题之一,它直接制约着铁路运营速度的提高和运载重量的增加,也影响着铁路安全运行。本文采用有限元方法,对我国C61型运煤货车,按照车辆/轨道系统的实际几何形状、材料性质和边界条件建立了包括车辆和轨道系统的有限元模型,应用大型非线性动力分析程序LS-DYNA3D来模拟车辆通过轨道错牙接头时的轮/轨动态响应过程。计算结果表明车轮和轨道之间的竖向动态接触力大约是静轮载的2倍,与已有的现场试验结果基本吻合。因此应用有限元方法研究车辆/轨道耦合系统是可行和可靠的。     

Computer algebra-perturbation solution to a nonlinear wave equation

In this paper, the higher-order asymptotic solution to the Cauchy problem of a nonlinear wave equation is found by using a computer algebra-perturbation method. The secular terms in the solution from straightforward expansions are eliminated with the straining of characteristic, coordinates and the use of the renormalization technique, and the four-term uniformly valid solution is obtained with the symbolic computation by using a computer algebra system. The comparison of the derived asymptotic solution and the numerical solution shows that they coincide with each other for smaller ε and agree quite well for larger ε (e. g., ε=0.25) Project supported by the National Natural Science Foundation of China and Shanghai Municiple Natural Science Foundation     

傅里叶变换投影栅线法测量大物体的变形

本文利用傅里叶变换投影栅线技术对大物体的离面变形进行了测量，分析了大物体的尺寸给测量过程带来的主要矛盾，讨论了方法的灵敏度和精度，用计算机数值模拟技术给出了大尺寸引起的频率变化所带来的误差。结果表明，傅里叶变换投影栅线技术可以用于大尺寸物体离面变形的精确测量。     

全息干涉条纹图的计算机自动处理与识别

本文应用数字图象处理与识别技术在IBM-PC/AT微处理计算机图象处理系统上对复杂的全息干涉条纹图进行了自动分析,文中采用二维灰度值检测的方法获取条纹的准峰或谷值二值图形,然后通过细化得到条纹中心,提出了用记忆跟踪算法自动去除毛刺和噪声线段.在用光标进行人机对话标定零级条纹后,可自动识别出其它整数条纹级数.分数级条纹级数可在整数级条纹数据之间进行线性或非线性插值得到.最后给出了全息条纹图分析的实例.     

Full-field speckle pattern image correlation with B-Spline deformation function

A full-field speckle pattern image correlation method is presented that will determine directly the complete, two-dimensional deformation field during the image correlation process on digital images obtained using computer vision systems. In this work, a B-Spline function is used to represent the object deformation field throughout the entire image area. This is an improvement over subset-based image correlation methods by implicitly maintaining position and derivative continuity constraints among subsets up to a specified order. The control point variables within the B-Spline deformation function are optimized iteratively with the Levenberg-Marquardt method to achieve minimum disparity between the predicted and actual deformed images. Results have shown that the proposed method is computationally efficient, accurate and robust. The general framework of this method can be applied ton-dimensional image correlation systems that solve for multi-dimension vector fields.     

Cubically Nonlinear Waves in a Piezoelastic Material

The paper proposes a new deformation model of piezomaterials that includes linear, quadratic, and cubic, and piezoeffect mechanisms. A nonlinear system of equations describing the propagation of plane waves is derived. Two new problems are solved analytically: generation of the third harmonic of an SH-wave and generation and interaction of new SH- and SV-waves after SH- and SV-waves are excited. All data needed for computer modeling are determined. The results of computer modeling are discussed     

用ADINA确定热电厂磨煤机打击轮磨损极限

利用ＡＤＩＮＡ程序计算磨损后打击轮的应力分布状态；根据强度理论，得到磨损极限，为打击轮维修提供了依据．实践证明，不超过磨损极限的打击轮修复以后可以满足使用精度要求，其使用期限与新的打击轮相同．磨损极限的确定为国家创造了经济效益     

抽样定理法重建流场的三维温度分布

结合气流场温度较低，只能得到较少干涉条纹的实际情况，提出了采用轴样定理法重建流场的三维温度分布的模型，并考查了该方法的计算机模拟运算结果，对具体的对象，进行了实验，并采用图像处理方法对条纹进行了一系列处理，最后重建了二个截面上的温度分布。